Car Racks

Hollywood's Sport Rider SE2 2-Bike Add-on Kit lets you carry an additional 2 bikes on your next adventure. It connects easily by sliding the add-on kit into the base unit (sold separately), inserting the attachment pin & clip, then tightening the lever. - Weight: 45 lbs - Capacity: 2 bikes, max 45 lbs per bike - Fits models HR1450, HR145R, and HRT220 - Space between bikes: 10 inches - Not to be used on any trailer, fifth wheel, or towed vehicle

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 8 locks, all using the same key

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 135cm / 53 in

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars MAZDA - CX-9 5-dr SUV with Normal Roof 2016 - 2019

The new Destination Rack is our lightest 4 bike platform hitch rack. Weighing only 42 pounds, this rack securely carries 4 bikes in individual wheel trays making loading and unloading quick and easy. Padded frame holders with ratchet straps slide vertically along the center post and rotate 360 degrees to attach to different frame shapes and sizes. The wheel trays use ratchet straps to secure the bikes wheels. Includes a locking threaded hitch pin.

Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.

Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).

The Thule Xadapt 2 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars BUICK - Regal 5-dr Sportback with Normal Roof 2018 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HYUNDAI - Tucson 5-dr SUV with Normal Roof 2010 - 2015

If you’re looking for a car rack that will haul your favorite 2-wheeled possessions with swagger and security, the Bones Hitch 3-bike has you covered. With arching lines and robust, American-made materials this hitch rack can be summarized in two words: beautiful simplicity. Weighing in at only 16 pounds, this 3-bike hitch rack is a full 25% lighter than similar racks—et just as strong. With integrated anti-sways and hold downs, the Bones Hitch is a fully functional piece of art. - Carries 3 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 16 pounds. - Made in Madison, WI.

Thru-axle adapter for the Kuat TRIO rack.

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key

Features - CustomAdjust Bar Height provides maximum carrying versatility for easy loading, carrying and storage - Integrated AirTrip bar technology redirects airflow for superior aerodynamics - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - Included tool-free load stops help secure oversized loads - Installation requires no cutting or drilling and only limited assembly - SecureLock locks the rack to the truck with four One-Key lock cylinders (included) Tech Specs - Dimensions: 16 x 71 x 29 in - Maximum load: 450 lb/204 kg. Please also check the maximum roof load capacity of your vehicle.

Great for families, double dates, or bringing your entire bike quiver, the HoldUp EVO +2 turns the 2" HoldUp EVO into a four-bike hauler. It's versatile enough to handle most bikes, from BMX to fat tire bikes. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. The whole unit can still tilt down and out of the way with bikes loaded, for easy rear-of-vehicle access, and the empty trays fold up and out of the way when not in use. Included SKS locks for each bike give you peace of mind. - Attaches to the 2" HoldUp EVO to carry two additional bikes - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Trays easily adjust to reduce bike-to-bike interference - Tilts down with bikes loaded for rear-of-vehicle access - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes, & E-bikes under 50 lbs. - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - ?Accommodates bike wheelbases up to 48" - Integrated SKS (Same Key System) locks included for added bike security - Compatible only with 2" version of HoldUp EVO & HoldUp Product Specs: - Weight: 36.44 lbs. - Dimensions: L 27.00 in x W 42.00 in x H 8.00 in - Limited Lifetime Warranty

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars FORD - Focus 4-dr Sedan with Normal Roof 2012 - 2018

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars KIA - Rio5 5-dr Hatchback with Normal Roof 2012 - 2017

- Heavy-duty, rust-free AL6061-T6 construction - Mounts vertically or horizontally - Great for storage and transportation - Compatible with the following fork spacing: - 9mm x 100mm (Standard QR) - 12mm x 100mm - 15mm x 100mm - 15mm x 110mm (Standard Boost) - 20mm x 110mm - Includes all axle adapters and QR skewer - Use: Fork Mount - Hitch Size/Mount: 100/110mm Spacing

Innovative kayak carrier that is safe, stylish, easy to use, and integrates seamlessly with Thule roof rack systems. Features - Quickly raise or fold when not in use using the convenient front release handle - Easily manage load straps while strapping down the kayak using the integrated StrapCatch - Kayaks are protected during transit due to the durable and soft rubber padding - Theft resistant design keeps carrier securely attached to load bars (locks included) - Easy to install directly into the Thule WingBar Evo or AeroBlade T-track, or around Thule SquareBar via the integrated, tool-free mounting hardware (SquareBar requires an adapter) Technical specifications - Load capacity: 75 lb - Dimensions: 18 x 8 x 17.5 in - Weight: 15.2 lb - Rubber cover for strap buckle - Lockable - One Key System compatible Fits the following Thule crossbars: - WingBar Evo - AeroBlade Edge - AeroBlade - SquareBar (Adapter/s required: Thule SquareBar Adapter 4-pack) - ProBar - Xsporter Pro

For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

The Swagman eBike/Cruiser Bar Adapter creates a higher top tube for your bike by attaching below the stem and seat post of your bikes. This will allow the ratcheting arms of your bike to hold step-through and heavier-weight bikes securely by grabbing onto the adapter. - Fits: Cruiser, eBikes and Step Through bikes requiring a higher top tube for use on Platform Hitch Mount Racks. - Max Load: 35 lbs. per bike when used on a Hanging Rack - Telescopic bar fits multiple bike sizes - Adapter comes equipped with vinyl-coated hangers - User friendly quick release - 25"-31" Maximum Width

An adapter for Thule Front Wheel Holder to enable transport of bikes with 12-15mm thru-axles. - Enables transportation of wheels with 12-15 mm thru-axle forks

An adapter set for Thule FastRide to enable transport of bikes with 9-15mm thru-axles. - Enables transportation of bikes with 9-15mm thru-axles

The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck's tailgate while the soft felt backing protects your truck's paint. Integrated SitTight bike cradles and G-hook buckles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - G-Hook tension lock system is easy on carbon bike frames and painted surfaces - Medium: Transports up to 5 bikes; Large: Transports up to 6 bikes - Rugged, vinyl coated nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your trucks paint job - Add your own bike lock to the built-in cable lock loop to secure GateKeeper and your bikes to your truck - Reinforced webbing ends for easy installation under the tailgate - Integrated strap management system keeps the pad tight and secure on the way to the trailhead - HindSight tuck-away cover opens up the view for your back-up camera - Medium: Fits mid-size and some older full-size trucks with tailgates from 53-61" wide; Large: Fits modern, full-size trucks with tailgates 62" or wider - Printed graphics and silver reflective Yakima logo PRODUCT SPECS - Size Medium: Weight: 6.43 lbs; Dimensions: L 53.00 in x W 5.00 in x H 17.00 in - Size Large: Weight: 8.15 lbs; Dimensions: L 62.00 in x W 7.00 in x H 20.00 in